Leakage in the pipe in a wall can take place any time. Once a pipe in the walls springs a leak, the situation can get out of hands in no time. As a result, it can cause a great damage to your property as it can collapse. Therefore, it is really very important to fix the leaking problem of the pipe in order to avoid any kind of bad luck or damage. You do not need to waste time and resources in calling an expensive repair company or plumber to fix the issue as it is a simple activity that you can fix yourself as well. However, you must have all the required equipments in hand, which are easily available in the market or the sanitary shops. Now read the given below simple steps of this amazing guide to fix your leaking pipe in a wall and enjoy a leakage free property:
Things you will need to fix a Leaking Pipe in a Wall:
- Compression Coupling
- Rubber Sheet
- Stainless-steel Hose Clamp or C-clamp
- Two-part Epoxy Putty
- Disposable Gloves
- Putty Knife
- Hacksaw or Pipe Cutter with Plastic Cutting Wheel
It is the time to expose the leakage
It is the time to expose the leakage by making a hole in your favorite wall.
Wipe the leaking pipe dry
Once you exposed the water leakage in the wall, wipe the wet pipe dry with a piece of dry cloth. Now rub the pipe down with sandpaper in order to remove any kind of oxidation or sediment around it.
It is the time to fix the water leakage problem
It is time to fix it with various methods. Follow the given below options to fix the leakage issue:
Method One: The first option you have to fix the leaking pipe in a wall is the “piece of rubber.” Grab a piece of rubber with a length enough to cover the leaking spot. Wrap it around the leaking pipe and fix it with a hose clamp – easily available in the market. Now, secure the applied hose clamp with a socket wrench or screwdriver etc.
Note: In case if you do not have a hose clamp available in hand, simply use a C-clamp in order to fix the rubber over the leaking pipe.
Second Two: The second method involves the easily available fiberglass-resin tape. Take a bowl and fill it with lukewarm water. Now, place the water-activated fiberglass-resin tape in the bowl and leave if for few minutes or until soften well. Now gently wrap it around the leaking spot in the pipe and remove all its wrinkles with gloved hands and secure it thoroughly.
Third Method: The third method is useful for the leakages around the fitting in a wall. Pick a disposable bowl and place two parts of epoxy putty in it. Blend it until smooth and then apply it over and all around the diagnosed leaking fitting, using a putty knife. Wait for few hours until it dries completely.
Fourth Method: The fourth method is helpful in fixing the water leakage problem with the polyvinyl chloride (PVC) pipes and the polybutylene (PB) plastic pipes. Cut out the leaking pipe with the help of a piper cutter or hacksaw with a plastic-cutting wheel and slip in the compression coupling. Now, use both of your gloved hands to secure the installed compression coupling and properly snug it with some pliers.
Note: Cut the section of leaking pipe long enough so that to slip into the compression coupling smoothly.
Check the repaired leaking pipe
Now open the main valve and restore the water in order to check out that either you have fixed the leaking pipe in a wall properly or not.