How to Install a Cheap Sprinkler System

Have a brown and dying yard? Does your grass need some sprucing up? This article will help you install a cheap sprinkler system for your yard! Resurrect your greenery and spruce up your yard and install a cheap sprinkler system!

How to Install a Cheap Sprinkler System – Materials

The materials need to install a cheap sprinkler system aren’t as numerous as you may believe. First you’ll need PVC pipe and PVC primer and cement. The amount you’ll need of this and all other materials depends on the size of your yard and cheap sprinkler system. You’ll need a Y-valve, a hose to male adapter, a shovel, and some Teflon tape. All of these are very cheap and will be all you need to install a cheap sprinkler system.

How to Install a Cheap Sprinkler System – First Steps

The first thing you’ll need to do is to take your Y-valve and attach it to an outside water spigot so that you can switch between water hose and cheap sprinkler system effortlessly. Now it’s time to get your hands dirty. Find the center of the area you want to water and dig a 6″ hole there to install a PVC pipe and a cleanout. From here, you’ll want to dig a trench back to the spigot. When installing your cheap sprinkler system, you’ll want to use gravel along all the of the trenches you dig. This helps the water filter down instead of building up.

How to Install a Cheap Sprinkler System – Laying Pipe

Your next step to install a cheap sprinkler system is to run PVC from the spigot. Attach the PVC to the spigot with a male adapter, primer, and cement. Next you’ll want to wrap the threads on the adapter with the Teflon. Now screw on the hose to male adapter. Now use the cement to attach the other end of the segment to a 90 degree elbow pipe to run out from the spigot. Now join segments of PVC until you reach the clean out you prepared earlier.

How to Install a Cheap Sprinkler System – Finishing Touches

To finish up your cheap sprinkler system, run your pipe back to the cleanout and attach it to another 90 degree elbow. Next attach another hose to male adapter as laid out earlier. At this point you can bury your PVC that you’ve laid. Next to install a cheap sprinkler system is to run your hose from the hose to male adapter to the sprinkler.

And that’s it! You’ve successfully installed a cheap sprinkler system in your own home. Now all you have to do is turn your spigot and set the y-valve next to your house to water your yard! You can set up as many sprinklers as you choose by simply branching the PVC pipes to more locales, depending on the size of your yard. Good luck installing your cheap sprinkler system!

Leave a Reply

Your email address will not be published. Required fields are marked *


four + 5 =