Limit the Moisture in Unfinished Basements

You need to limit the moisture in unfinished basements, as this causes many health problems not to mention it will create an odor in your home that is hard to get rid of. Mold and mildew will trigger asthma attacks and other health problems this is why you need to get a handle on the problem. You need to limit the moisture in unfinished basements or eliminate it all together.

There are things you can do to limit the moisture out of your unfinished basement. One of the first things you need to do is to get the dampness out the cellar. This can be done in a few ways; some of course are cheaper than others are and some are temporary measures while some will last longer.

Homeowners can limit the moisture in unfinished basements by using a humidifier to drawl the wetness out of the air. These can be purchased at any home improvement store around the nation. Homeowners need to be aware of the size of the humidifier they purchase, as it needs to be able to handle the size of their cellar. Check out the packages to make sure you get the right size.

Homeowners can limit the moisture in unfinished basements by using products such as ridX or cups of baking soda, which can be purchased at many department stores around the country. Cups filled with either of these products will pull the moisture out of the air, and you simply refill the cups as needs. Place the cups high where animals or children cannot reach them, and this is a temporary measure to limit the moisture in unfinished basements.

Homeowners can limit the moisture in unfinished basements by filling in the holes in the concrete. When concrete cellar walls are poured and removed from the forms, they have tiny holes in them, which will let in moisture eventually. Fill these holds with grout, and sand when it is dry to limit the moisture in unfinished basements.

Homeowners can limit the moisture in unfinished basements by using one cup of bleach in a gallon of water to wash the walls. Let this air dry, so open the windows, and get the air flowing down there.

Homeowners can limit the moisture in unfinished basements by using grout to fill in the holes in the concrete and then use a mold and mildew inhibiting paint. Homeowners can limit the moisture in unfinished basements by going ahead and adding a heating system within the room. If you have a dryer, vent it into the cellar to help dry it out but be sure to put a panty hose over the pipe so that lint is not going all over the cellar floor.

There are many ways that homeowners can limit the moisture in an unfinished basement, and I hope this guide has helped you.

Leave a Reply

Your email address will not be published. Required fields are marked *


7 × five =