How to Install a Flagpole

Are you bubbling with patriotism? Does your love for your country exceed the diminutive frame of your human shell? This guide will show you how to install a flagpole so you can hoist your colors up high and show your loyalty!

How to Install a Flagpole – Materials

To install a flagpole in your yard, you don’t need any thing fancy, but a trip to the local home improvement store is certainly in order. You’ll need a single 14’x 2″ wooden pole, concrete, a posthole digger, a level, a tape measurer, a power drill, a pulley, a length of rope and a cleat, some spring clips, and the flag of your choosing.

How to Install a Flagpole – Size Matters

When you install a flagpole in your yard, you don’t want one that dwarves your home, but neither do you want one that is shrimpy! Once you’ve determined what size pole you need, you’re ready to move on to the next step to install a flagpole.

How to Install a Flagpole – Dig Dug

Now that you have your properly sized pole and tools ready, you’re ready to start digging your hole to install a flagpole. You’ll want to use your posthole diggers to dig a hole that is roughly four times the diameter of the pole, and dig the hole roughly ten percent of the height.

How to Install a Flagpole – Pulleys and Cleats

Our next step to install a flagpole in your yard is to attach the pulley to one end of the pole. You’re going to want it ways above ground level so be sure to measure properly. Once you’ve done this, you’re ready to attach your cleat to the other end of the pole, around five inches from the end. Next to install a flagpole in your yard, you’ll need to tie two loops in the rope and thread it through the pulley. Tie off the rope around the cleat and straighten the pole to get it ready for the concrete.

How to Install a Flagpole – Concrete

Now we’re almost to the last step to install a flagpole. It’s time to mix up the concrete and pour it into the hole to set the pole. Let it dry overnight and get ready to hoist your colors! Simply attach the flag to the loops we tied using the spring clips and raise it up hand over hand and show the whole neighborhood just how much you live your nation!

The whole of the process to install a flagpole, minus the time it takes for the concrete to set, is all of about an hour, and is a great project for a day off. If you are the patriotic type, then scoot on off to the hardware store and scoot back with the materials you need to install a flagpole in your home!

Leave a Reply

Your email address will not be published. Required fields are marked *


three + = 9