First of all, you have to take the necessary measurement to cut your plywood sheets. Then, by using the compass, you have to mark a diameter hole on each plywood piece.
Take the jigsaw and cut the holes out into 6-inches. Now, you have to lay down the two pieces of the plywood which you cut in the first step on the ground to form a rectangle. Hammer the nails into the pieces to fix them in a rectangle. Repeat the same procedure to make remaining 2/4 rectangles.
Then, you have to connect the plywood pieces with drywall screws. It is very important for you to fit the plywood correctly into the rectangular frame.
Take the drill and make holes in the frames. Then, mark the measurements with a pencil on the frame and form two legs of the frame. It is very important for you to make the balanced legs so that it can be placed anywhere properly. Make legs for the other frame.
Now, you have to take the paints of different colours to make designs on the game boxes. It is not necessary to make the conventional design, you can use any artwork as per your choice. You can even right your name or initials on it because your own it. But, it will be better for you to give a little bit of conventional tough so that it may be recognised easily by others.
Then, take the fabric and cover the frame properly. Then, sew the fabric with the sewing machine. You Baggo bags are ready. Enjoy!